Truck-mounted Concrete Wet Spraying Machine GHP16C-III

Working ability:16m3/h

Inner Diameter of Conveying Pipe:φ125~φ57Variable Diameter

Main Motor Power:37kW

Range of use: Water conservancy construction, municipal construction, road and bridge construction, tunnel construction, etc

Get a Quotation

Tel:+86-379-60118689

Email:vip@gengli.com

  • Features
  • Spare parts
  • Production Workshop
  • Send Message

Truck-mounted Concrete Wet Spraying Machine GHP16C-III owns features as below:
1、The automotive chassis is adopted, and spare parts are of high universality, which makes maintenance very convenient. It owns features such as low oil consumption, high power, reliable performance, convenient spare parts supply and maintenance.
2、The pumping system is of less energy consumption, high work efficiency, low fault rate, less quick-wear parts, low maintenance cost, high system reliability and stable conveying amount.
3、The spraying system works with a single spray nozzle or several spray nozzles, improving the work efficiency.
4、Accelerating agent can be fed continuously by stepless speed regulation according to the spraying amount. 5、Self-lubrication system is equipped: for the key sealing parts self-lubrication is available, and the grease-filling amount and the filling time is controlled automatically, greatly prolonging the life of quick-wear parts.
6、Steady and continuous spraying, without impulse.

Main Technical Parameters



Parameters  of the Whole Machine
Overall Dimension(L*W*H) 6800*2100*2500mm
Total Weight 7000kg

Pumping System
Theoretical Spraying Displacement 16m3/h
Pump Cylinder Diameter 140mm
Pumping Stroke 1000mm
Diameter of Conveying Pipe ¢125~¢57mm Variable Diameter
Pumping System Concrete Outlet Pressure 63Mpa
Hopper Capacity 0.3m3
Feeding Height 1450mm
Concrete Distribution Valve S Pipe Valve
Lubricating System Automatic + Manual
Concrete Slump 12-18cm
Type of Cooling Air Cooling
Dust Concentration <6mg/m3
Rebound Rate ≤10%
Maximum Aggregate Diameter ≤16mm
Water Cement Ratio of Suitable Mixture 0.45-0.6

Chassis
Engine Power 68 kW
Wheel Base 3200mm
Maximum Travel Speed 40km/h
Maximum Gradeability 30%
Brake Mode Air-cut Brake

Accelerating Agent System
Model of Accelerating Agent Pump G30-1
Driving Mode Hydraulic Drive
Accelerating Agent Displacement 0~700 L/h
Maximum Pressure for Accelerating Agent 2 Mpa

Hydraulic System
Power of Main Motor 37kw
Oil Tank Capacity 200L
Hydraulic Oil Dustiness 8~9(NAS1638)
Main Pump Discharge 80ml/r

InquiryPlease feel free to submit your inquiry information to us. We will contact with you as soon as possible.

InquiryPlease feel free to submit your inquiry information to us. We will contact with you as soon as possible.